Depth to Water contours

SDE Feature Class

Tags
Depth, Water, Contour, SAWPA, Chino, Basin


Summary

The Depth to Water Contour dataset was developed for the Stormwater and Water Conservation Tracking Tool for Riverside County and its Copermittees. The purpose of the Stormwater and Water Conservation Tracking Tool is to improve integration of water quality, stream protection, stormwater management, water conservation and re-use, and flood protection with land use planning and development processes. Depth-to-groundwater contours for the shallow aquifer of the Chino Basin for Spring 2010 in feet below ground-level. The Depth to Water contours for the portion of OCWD in the SAWPA data - An interpretation of the approximate isobaths of near surface water contours 1980. Provides an assessment of the depth to groundwater in feet below ground surface.

Description

This shapefile contains depth-to-groundwater contours for the shallow aquifer of the Chino Basin for spring 2010 in feet below ground-level. Depth-to-groundwater determined by subtracting a groundwater level elevation raster from a USGS 10m Digital Elevation Model. The depth-to-groundwater contours were generated using a raster-contouring tool in the Spatial Analyst extension of ESRI's ARCVIEW 10, and were then generalized and smoothed. Groundwater-levels were estimated based on interpolations made using an Ordinary Kriging model,. The inputs to the model were groundwater-level measurements and points derived from groundwater-level elevation contours. Contours of groundwater-level elevation were created by hand, digitized, and included in Exhibit 22 of the biennial State of the Basin Report (2010) for the Chino Basin Watermaster. Due to variations in local topography and the scale at which the groundwater-level elevation contours were created, the contours contained in this shapefile should be considered generalized representations of depth to groundwater at any given location within the Chino Basin.

SAWPA - Groundwater Contours for Santa Ana Watershed Groundwater Management Zones as calculated from AWQ Report for the period 1987-2006. Elevation data is in Feet.

Data currency - SAWPA - 1987 - 2006. OCWD portion - 1980. Chino Basin - Spring 2010

Currency of updates - Yet to be determined

Expected next update - Yet to be determined

Credits

Chino Basin - Wildermuth Environmental Inc, 2011, "Chino Basin Optimum Basin Management Program - 2010 State of the Basin Report" SAWPA - OCWD portion (Orange County) from Orange County Water District.

Use limitations

(a) Content is provided for informational purposes only. You should exercise judgment in your use of this Content. (b) By using the Content, you do not receive any, and Wildermuth Environmental and/or Chino Basin Watermaster retain all ownership rights in the Content. You may not use, access or allow others to use or access the Content unless you have been specifically permitted to do so by Wildermuth Environmental or by Chino Basin Watermaster, in a separate agreement. (c) Use of the Content is not intended for design. No warranty expressed or implied is made regarding the accuracy or utility of these data for any other purpose other than that stated in the published report in which these data were published, nor shall the act of distribution of these data constitute any such warranty. (d) Wildermuth Environmental and the Chino Basin Watermaster assume no legal responsibility for the user's reliance, use, or interpretation of the data provided, and shall not be liable for any loss or injury resulting from reliance upon the Content.

Per SAWPA - DTW Contours are for Planning use only.

Extent

West  -118.155873    East  -116.824500
North  34.240967    South  33.603492

Scale Range
Maximum (zoomed in)  1:5,000
Minimum (zoomed out)  1:150,000,000

ArcGIS Metadata 

Topics and Keywords 

*Content type  Downloadable Data


Citation 

Title Depth to Water contours


Presentation formats* digital map


Resource Details 

Dataset languages* English (UNITED STATES)


Spatial representation type* vector


*Processing environment Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; Esri ArcGIS 10.1.0.3035


Credits
Chino Basin - Wildermuth Environmental Inc, 2011, "Chino Basin Optimum Basin Management Program - 2010 State of the Basin Report" 
SAWPA - OCWD portion (Orange County) from Orange County Water District.  
ArcGIS item properties
*Name SDE4COUNTYRS.SDE.DTW_Contours
*Location Server=10.11.10.24; Service=sde:sqlserver:10.11.10.24; Database=SDE4COUNTYRS; User=sde; Version=sde.DEFAULT
*Access protocol ArcSDE Connection

Extents 

Extent
Geographic extent
Bounding rectangle
Extent type  Extent used for searching
*West longitude -118.155873
*East longitude -116.824500
*North latitude 34.240967
*South latitude 33.603492
*Extent contains the resource Yes

Extent in the item's coordinate system
*West longitude 5985533.499611
*East longitude 6386764.397279
*South latitude 2168442.467560
*North latitude 2395688.277503
*Extent contains the resource Yes

Resource Constraints 

Constraints
Limitations of use
(a) Content is provided for informational purposes only. You should exercise judgment in your use of this Content. (b) By using the Content, you do not receive any, and Wildermuth Environmental and/or Chino Basin Watermaster retain all ownership rights in the Content. You may not use, access or allow others to use or access the Content unless you have been specifically permitted to do so by Wildermuth Environmental or by Chino Basin Watermaster, in a separate agreement. (c) Use of the Content is not intended for design. No warranty expressed or implied is made regarding the accuracy or utility of these data for any other purpose other than that stated in the published report in which these data were published, nor shall the act of distribution of these data constitute any such warranty. (d) Wildermuth Environmental and the Chino Basin Watermaster assume no legal responsibility for the user's reliance, use, or interpretation of the data provided, and shall not be liable for any loss or injury resulting from reliance upon the Content.Per SAWPA - DTW Contours are for Planning use only.

Spatial Reference 

ArcGIS coordinate system
*Type Projected
*Geographic coordinate reference GCS_North_American_1983
*Projection NAD_1983_StatePlane_California_VI_FIPS_0406_Feet
*Coordinate reference details
Projected coordinate system
Well-known identifier 102646
X origin -118608900
Y origin -91259500
XY scale 3048.0060960121914
Z origin 0
Z scale 1
M origin 0
M scale 1
XY tolerance 0.0032808333333333335
Z tolerance 0.001
M tolerance 0.001
High precision true
LatestWKID  2230
Well-known text PROJCS["NAD_1983_StatePlane_California_VI_FIPS_0406_Feet",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Lambert_Conformal_Conic"],PARAMETER["False_Easting",6561666.666666666],PARAMETER["False_Northing",1640416.666666667],PARAMETER["Central_Meridian",-116.25],PARAMETER["Standard_Parallel_1",32.78333333333333],PARAMETER["Standard_Parallel_2",33.88333333333333],PARAMETER["Latitude_Of_Origin",32.16666666666666],UNIT["Foot_US",0.3048006096012192],AUTHORITY["EPSG",2230]]

Reference system identifier
*Value 2230
*Codespace EPSG
*Version 7.9.4


Spatial Data Properties 

Vector
*Level of topology for this dataset  geometry only


Geometric objects
Feature class name SDE4COUNTYRS.SDE.DTW_Contours
*Object type  composite
*Object count 640



ArcGIS Feature Class Properties
Feature class name SDE4COUNTYRS.SDE.DTW_Contours
*Feature type Simple
*Geometry type Polyline
*Has topology FALSE
*Feature count 640
*Spatial index TRUE
*Linear referencing FALSE



Distribution 

Distribution format
*Name SDE Feature Class


Fields 

Details for object SDE4COUNTYRS.SDE.DTW_Contours 
*Type Feature Class
*Row count 640


Field OBJECTID
 
*Alias OBJECTID
*Data type OID
*Width 4
*Precision 10
*Scale 0
*Field description
Internal feature number.
*Description source
Esri
*Description of values Sequential unique whole numbers that are automatically generated.




Field Elevation
 
*Alias Elevation
*Data type Double
*Width 8
*Precision 15
*Scale 2




Field UniqueID
 
*Alias UniqueID
*Data type String
*Width 30
*Precision 0
*Scale 0




Field Shape
 
*Alias SHAPE
*Data type Geometry
*Width 4
*Precision 0
*Scale 0
*Field description
Feature geometry.
*Description source
ESRI
*Description of values Coordinates defining the features.




Field SHAPE.len
 
*Alias SHAPE.len
*Data type Double
*Width 0
*Precision 0
*Scale 0






Metadata Details 

*Metadata language English (UNITED STATES)


Scope of the data described by the metadata* dataset
Scope name* dataset


*Last update 2012-10-10


ArcGIS metadata properties
Metadata format ArcGIS 1.0
Standard or profile used to edit metadata ItemDescription


Created in ArcGIS for the item 2012-10-09 12:17:04
Last modified in ArcGIS for the item 2012-10-10 11:17:36


Automatic updates
Have been performed Yes
Last update 2012-10-10 10:12:16


Thumbnail and Enclosures 

FGDC Metadata (read-only) 

Entities and Attributes